Search Catalog
      GO   
 All Categories    Circular Cold Saws
All Categories > By Machine Type > Circular Cold Saws  
 

Circular Cold Saws


Click on a Product to view details.

Search Items
Kaltenbach KKS 400/450 Universal Semi-Automatic Circular Cold Saw

Kaltenbach KKS 400/450 Universal Semi-Automatic Circular Cold Saws

(4)
Robust, miter-cutting circular cold saw machines primarily for ferrous (but also non-ferrous) metals. 180º miter range with hard stops at 45º - 90º - 45º. Kaltenbach KKS "upstroking" saws are widely used in fabrication work and wherever fast, clean, accurate, straight (and miter) cuts are needed on small-to-medium structural sections and solids and are particularly revered where frameworks are produced.

Robot welding? Look into the Kaltenbach KKS!

The Kaltenbach up-stroking blade principle provides several key advantages:
  • The blade immediately enters the cut for reduced cycle time
  • Coolant is applied to the blade below the table for less mess
  • Safe set-up with all the saw gear ...
Kaltenbach KKS 400/450 Circular Cold Saws for Exhaust Trimming/Fixtured Jobs

Kaltenbach KKS 400/450 Circular Cold Saws for Exhaust Trimming/Fixtured Jobs

(4)
Robust, circular cold saw machines primarily for ferrous (but also non-ferrous) metals. Over the years, Kaltenbach has supplied dozens of exhaust tube manufacturers with customized KKS machines with added features for cutting thin-walled bent steel and stainless steel tubing. Available enhancements include:
  • Pre drilled hole pattern in table to facilitate quick fixture changes
  • Coolant atomizer system to reduce clean up and washing downstream
  • Two palm cycle start
  • Fast approach blade setting for tubes fixtured above the table
Kaltenbach can customize a standard KKS400 H or KKS450 H machine to suit your needs, or we also offer the KKS 450 R, which is designed as a jig & fixture machine from the ...
Kaltenbach KKS 400 NA Automatic Circular Cold Saws

Kaltenbach KKS 400 NA Automatic Circular Cold Saws


High-performance automatic circular cold sawing machine for ferrous (and non-ferrous) metals, sections and solids. Widely used in manufacturing wherever fast, clean, accurate cuts are needed, particularly where surface finish is important. Miter cuts possible in semi-auto mode. Ease of set up and use combines with durability and long-term reliability. Tens of thousands of KKS cold saws have been supplied worldwide. Standard features on the KKS400 NA:
  • Hydraulic blade feed
  • Hydraulic clamping on both sides of the cut
  • NC programming of cut length and quantity
  • 40” stroke length - multiple-stroke via NC
The Kaltenbach up-stroking blade principle provides several key advantages:
Kaltenbach KKS 401 NA CNC Miter Cutting Circular Cold Saws

Kaltenbach KKS 401 NA CNC Miter Cutting Circular Cold Saws


KKS 401 NA Circular Cold Saw

The KKS 401 NA has long been the gold standard for CNC miter cutting circular cold saws. With a 120º miter range, a full compliment of automatic loading and sorting options & renowned performance and reliability, the KKS401 NA is the true Machine Tool of Saws. These machines are commonly used in the manufacturing of: Buses, Trailers, Agricultural Equipment, Escalators/Elevators, Display Racks/Shelving, and anywhere else where precision miter cutting is required. The machine comes standard with a Windows™-based Touch Screen operator interface. This system can provide the following:

Proficut Operator Screen
  • Programming of part length, angles & quantity
  • Bar ...
Kaltenbach MSK 471 NA Fully Automated Straight-Cut Circular Saw for Steel

Kaltenbach MSK 471 NA Fully Automated Straight-Cut Circular Saws for Steel


The MSK 471 NA high-performance circular sawing machine is designed for HSS or carbide-tipped saw blades and is characterized by an especially short remnant length. Various material pre-storage magazine options are available to enable unmanned operation. Cut-offs, remnants and trim cuts can be sorted fully automatically to pre-selectable bin positions. Standard features on the MSK 471 NA:
  • High-precision cuts, with positioning of the feed gripper via ball screw and servo motor.
  • Extended blade life through efficient cooling: flood or atomizer.
  • Virtually zero set-up time thanks to long-stroke clamping throughout.
  • High degree of automation with various upstream magazine options and fully automatic sorting of trim cuts. ...
Kaltenbach SKL 450 E & H Semi Automatic Circular Cold Saws for Aluminum

Kaltenbach SKL 450 E & H Semi Automatic Circular Cold Saws for Aluminum

(2)
A wide miter cutting range of ± 90º affords these circular cold saws a high degree of flexibility allowing them to be used efficiently in a wide variety of non-ferrous applications. Robust build quality enables these machines to cut heavy-wall profiles and solids.

Standard features include:
  • 18" saw blade capacity
  • Hydro-pneumatic blade feed, infinitely variable
  • Electronic blade height setting
  • Coolant atomizer system
  • Kaltenbach upstroking blade design
  • Pneumatic vertical clamp
  • Interlocked safety hood over cutting area
The "H" version of the SKL 450 semi-automatic circular cold saw is designed with an expandable control system for customers that need to integrate the machine into automatic ...
Kaltenbach SKL 450 NA Automatic Circular Cold Saw for Aluminum

Kaltenbach SKL 450 NA Automatic Circular Cold Saws for Aluminum


The SKL 450 NA non-ferrous automatic circular cold saw offers high performance and robust construction for large volume production runs. Precision, good surface finish, and speed are all hallmarks of the SKL 450 NA. Our standard vertical clamping unit clamps on both sides of the blade to reduce vibration in the cut and clean part-off. These machines can be equipped with an automatic loading magazine, NC control, and chip exhaust unit for a highly efficient sawing system. Standard features include:
  • 18” saw blade capacity (6" ø material)
  • Hydro-pneumatic blade feed, infinitely variable
  • Electronic blade height setting
  • Coolant atomizer system
  • Kaltenbach upstroking blade design
  • Pneumatic vertical ...
KKS 451 NA

Kaltenbach KKS 451 NA Fully Automatic Universal Circular Saw


This fully automatic universal circular saw offers automatic processing of flat, angle and solid materials, tubes and special profiles with optimum flow through the Kaltenbach “cut from below” principle.  High cutting quality is achieved through workpiece clamping on both sides of the saw blade and infinitely variable adjustment of the saw-blade feed, as well as contactless saw blade return stroke.  The special gripper design affords minimal end-piece lengths. Electronic cutting-height adjustment and rapid reverse motion of the saw blade provide short cutting and cycle times.  Touch screen controls offer simple operation and programming.
Kaltenbach HDM Circular Saws

Kaltenbach HDM Circular Saws

(2)
Designed for the structural fabricator and/or steel service center, the HDM range of circular cold saws combine ultra-heavy-duty construction with control sophistication to give unsurpassed performance on the full spectrum of structural steel sections. HDMs can be supplied as stand-alone machines, combined with modular handling/measurement systems or incorporated in state-of-the-art, turnkey fabrication lines including coupled CNC drilling machines, beam lines, plate fabricators, copers, etc. The HDM is the benchmark cold saw for the larger structural fabricator or structural steel service center.

If you are a fabricator and your annual tonnage exceeds 9,000 per shift, then you need to look into cold sawing!
Kaltenbach T3 Material Handling Equipment - L45E

Kaltenbach T3 Material Handling Equipment


Kaltenbach manufacturers a wide range of material handling equipment for its line of circular cold saws. Our rugged input roller conveyors can be used with both our semi-automatic and automatic machines.

L 45 E Manual Length Stop; Kentucky Gauge PD-100. Our length measuring units are primarily supplied with our semi-automatic machines. We offer a manual length stop (L 45 E) with measurement by scale and vernier, as well as a programmable length stop ideal for high value small batch runs.

Our conveyor and length stop systems are used on both our ferrous and non-ferrous ranges of equipment, and are designed to take solid bar weights to the machines’ maximum capacity.
Hyd-Mech C350S

Hyd-Mech C Series Vertical Column Cold Saws

(5)
When the job calls for multi-lengths and quantities.
Hyd-Mech P225

Hyd-Mech P Series Pivot Arm Cold Saws

(3)
P-Series cold saws for quick, clean and accurate metal cutting!
Hyd-Mech PNF350A

Hyd-Mech PNF Series Non-Ferrous Cutting Saws

(3)
High speed blade RPM for the cutting of aluminum, brass, PVC and other soft metals.

Contact Us With Your Requirements